Significantly less maintenance is required, thanks to coarse debris extraction
More convenience, thanks to automatically driven self cleaning of the belt filter. Adjustable cleaning Sensor controls the belt run, depending on the degree of pollution. Incl. LED function check
Cleaning of filter sponges directly in the filter, without removal
Sludge drain with slide valve for removing debris from the filter system
Different filter media for optimal development of filter bacteria
Use of the PhosLess filter media tubes as needed for string algae reduction (optional accessory)
Optimally matched to OASE AquaMax Eco filter pumps
Direct connection possibility for Bitron C and Eco UVC clarifiers
Reinforced strap material for an extended service life
Double-sealed motor for an extended service life
Water distributor without danger of clogging: Distributes the water uniformly on the belt filter
Sludge basket with greater volume and simplified handling
Rubberised separating lip for outstanding separation result
Free brush for occasional cleaning of the belt filter
Manual belt run now possible via button
Intelligent function checks
Sensors detect the pollutant level and activate the belt run automatically. An LED display shows required cleaning measures.
Automatic cleaning
Screened coarse debris is conveyed automatically into the sludge basket
Sludge basket
Accumulated sludge can be conveniently taken out and removed from the filter system.
Optimised separating lip
For an even better separation result in the case of non-uniform pollution burden.
Technical data
Dimensions (L x W x H)
mm
788 x 590 x 645
Rated voltage (primary, secondary)
230 V / 50 Hz, 12 V / AC
Power consumption
W
5
Cable length 12 V device (with power unit)
m
2.10 (Power unit) + 5.00
Net weight
kg
27.00
Number of filter foams, total
Unit
16
Number of blue filter foams
Unit
4
Number of red filter foams
Unit
6
Number of purple filter foams
Unit
6
Special filter granulate
kg
5.00
Temperature display
No
Coarse debris extraction
µm
300
Connection inlet
mm
25 / 32 / 38 / 50
Connection inlet
1", 1 ¼", 1 ½", 2"
Connections, outlet
DN 110
Connections, sludge discharge
DN 50
Litres per hour, min.
l/h
8000
Max. flow rate
l/h
12500
Suitable for ponds up to max.
m³
90.0
Suitable for ponds with fish stock
m³
45.0
Suitable for ponds with koi<span class="sternhochgestellt"> *1</span>